10 Kommandoen fir System- an Hardwareinformatioun am Linux ze sammelen


Et ass ëmmer eng gutt Praxis fir ze wëssen datt d'Hardware Komponente vun Ärem Linux System lafen, dëst hëlleft Iech mat Kompatibilitéitsprobleemer ze këmmeren wann et ëm d'Installatioun vun Pakete kënnt, Chauffeuren op Ärem System mat apt.

Dofir an dësen nëtzlechen Kommandoen déi Iech hëllefe kënnen Informatiounen iwwer Äre Linux System an Hardware Komponenten ze extrahieren.

1. Wéi Linux System Informatiounen ze Vue

Fir nëmmen de Systemnumm ze kennen, kënnt Dir de Kommando uname benotzen ouni e Schalter deen Systeminformatioun dréckt oder de Kommando uname -s dréckt den Kernelnumm vun Ärem System.

[email  ~ $ uname

Linux

Fir Ären Netzwierk Hostnumm ze gesinn, benotzt den '-n' Schalter mam Uname Kommando wéi gewisen.

[email  ~ $ uname -n

linux-console.net

Fir Informatiounen iwwer Kernel-Versioun ze kréien, benotzt den '-v' Schalter.

[email  ~ $ uname -v

#64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014

Fir d'Informatioun iwwer Är Kernel Verëffentlechung ze kréien, benotzt den '-r' Schalter.

[email  ~ $ uname -r

3.13.0-37-generic

Fir Äre Maschinn Hardware Numm ze drécken, benotzt den '-m' Schalter:

[email  ~ $ uname -m

x86_64

All dës Informatioun kann op eemol gedréckt ginn andeems Dir de Kommando 'uname -a' leeft wéi hei ënnendrënner.

[email  ~ $ uname -a

Linux linux-console.net 3.13.0-37-generic #64-Ubuntu SMP Mon Sep 22 21:28:38
UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

2. Wéi Linux System Hardware Informatiounen Bléck

Hei kënnt Dir de lshw Tool benotze fir grouss Informatioun iwwer Är Hardwarekomponenten wéi CPU, Disken, Memory, USB Controller, etc.

lshw ass e relativ klengt Tool an et gi e puer Optiounen déi Dir mat derbäi benotze kënnt wann Dir Informatioun extrahéiert. D'Informatioun geliwwert vum lshw gouf aus verschiddene/proc Dateien gesammelt.

Bemierkung: Denkt drun datt de lshw Kommando vum Superuser (root) oder sudo Benotzer ausgefouert gëtt.

Fir Informatiounen iwwer Är Linux System Hardware ze drécken, fuert dëse Kommando.

[email  ~ $ sudo lshw

linux-console.net               
    description: Notebook
    product: 20354 (LENOVO_MT_20354_BU_idea_FM_Lenovo Z50-70)
    vendor: LENOVO
    version: Lenovo Z50-70
    serial: 1037407803441
    width: 64 bits
    capabilities: smbios-2.7 dmi-2.7 vsyscall32
    configuration: administrator_password=disabled boot=normal 
    chassis=notebook family=IDEAPAD frontpanel_password=disabled 
    keyboard_password=disabled power-on_password=disabled 
    sku=LENOVO_MT_20354_BU_idea_FM_Lenovo Z50-70 
    uuid=E4B1D229-D237-E411-9F6E-28D244EBBD98
  *-core
       description: Motherboard
       product: Lancer 5A5
       vendor: LENOVO
       physical id: 0
       version: 31900059WIN
       serial: YB06377069
       slot: Type2 - Board Chassis Location
     *-firmware
          description: BIOS
          vendor: LENOVO
          physical id: 0
          version: 9BCN26WW
          date: 07/31/2014
          size: 128KiB
          capacity: 4032KiB
          capabilities: pci upgrade shadowing cdboot bootselect edd  
          int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 
int13floppy2880 int9keyboard int10video acpi usb biosbootspecification uefi
......

Dir kënnt e Resumé vun Ärer Hardwareinformatioun drécken andeems Dir d'Optioun -short benotzt.

[email  ~ $ sudo lshw -short

H/W path       Device      Class          Description
=====================================================
                           system         20354 (LENOVO_MT_20354_
                                          BU_idea_FM_Lenovo Z50-70)
/0                         bus            Lancer 5A5
/0/0                       memory         128KiB BIOS
/0/4                       processor      Intel(R) Core(TM) i5-4210U 
                                          CPU @ 1.70GHz
/0/4/b                     memory         32KiB L1 cache
/0/4/c                     memory         256KiB L2 cache
/0/4/d                     memory         3MiB L3 cache
/0/a                       memory         32KiB L1 cache
/0/12                      memory         8GiB System Memory
/0/12/0                    memory         DIMM [empty]
/0/12/1                    memory         DIMM [empty]
/0/12/2                    memory         8GiB SODIMM DDR3 Synchronous 
                                          1600 MHz (0.6 ns)
/0/12/3                    memory         DIMM [empty]
/0/100                     bridge         Haswell-ULT DRAM Controller
/0/100/2                   display        Haswell-ULT Integrated 
                                          Graphics Controller
/0/100/3                   multimedia     Haswell-ULT HD Audio Controller
...

Wann Dir d'Ausgab als HTML-Datei generéiere wëllt, kënnt Dir d'Optioun -html benotzen.

[email  ~ $ sudo lshw -html > lshw.html

3. Wéi Linux CPU Informatiounen Bléck

Fir Informatioun iwwer Är CPU ze gesinn, benotzt de lscpu Kommando well et Informatioun iwwer Är CPU Architektur weist wéi eng Zuel vun CPUs, Cores, CPU Famill Modell, CPU Cache, Threads, etc vu sysfs an /proc/cpuinfo.

[email  ~ $ lscpu

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    2
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 69
Stepping:              1
CPU MHz:               768.000
BogoMIPS:              4788.72
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              3072K
NUMA node0 CPU(s):     0-3

4. Wéi sammelen Linux Block Gerät Informatiounen

Block Apparater sinn Stockage Apparater wéi Festplack, Flash fiert, etc. lsblk Kommando gëtt benotzt Informatiounen iwwert Block Apparater wéi follegt ze Rapport.

[email  ~ $ lsblk

NAME    MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda       8:0    0 931.5G  0 disk 
├─sda1    8:1    0  1000M  0 part 
├─sda2    8:2    0   260M  0 part /boot/efi
├─sda3    8:3    0  1000M  0 part 
├─sda4    8:4    0   128M  0 part 
├─sda5    8:5    0 557.1G  0 part 
├─sda6    8:6    0    25G  0 part 
├─sda7    8:7    0  14.7G  0 part 
├─sda8    8:8    0     1M  0 part 
├─sda9    8:9    0 324.5G  0 part /
└─sda10   8:10   0   7.9G  0 part [SWAP]
sr0      11:0    1  1024M  0 rom  

Wann Dir all Blockgeräter op Ärem System kucke wëllt, da gitt d'Optioun -a.

[email  ~ $ lsblk -a

NAME    MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda       8:0    0 931.5G  0 disk 
├─sda1    8:1    0  1000M  0 part 
├─sda2    8:2    0   260M  0 part /boot/efi
├─sda3    8:3    0  1000M  0 part 
├─sda4    8:4    0   128M  0 part 
├─sda5    8:5    0 557.1G  0 part 
├─sda6    8:6    0    25G  0 part 
├─sda7    8:7    0  14.7G  0 part 
├─sda8    8:8    0     1M  0 part 
├─sda9    8:9    0 324.5G  0 part /
└─sda10   8:10   0   7.9G  0 part [SWAP]
sdb       8:16   1         0 disk 
sr0      11:0    1  1024M  0 rom  
ram0      1:0    0    64M  0 disk 
ram1      1:1    0    64M  0 disk 
ram2      1:2    0    64M  0 disk 
ram3      1:3    0    64M  0 disk 
ram4      1:4    0    64M  0 disk 
ram5      1:5    0    64M  0 disk 
ram6      1:6    0    64M  0 disk 
ram7      1:7    0    64M  0 disk 
ram8      1:8    0    64M  0 disk 
ram9      1:9    0    64M  0 disk 
loop0     7:0    0         0 loop 
loop1     7:1    0         0 loop 
loop2     7:2    0         0 loop 
loop3     7:3    0         0 loop 
loop4     7:4    0         0 loop 
loop5     7:5    0         0 loop 
loop6     7:6    0         0 loop 
loop7     7:7    0         0 loop 
ram10     1:10   0    64M  0 disk 
ram11     1:11   0    64M  0 disk 
ram12     1:12   0    64M  0 disk 
ram13     1:13   0    64M  0 disk 
ram14     1:14   0    64M  0 disk 
ram15     1:15   0    64M  0 disk 

5. Wéi Drécken USB Controller Informatiounen

De Kommando lsusb gëtt benotzt fir Informatioun iwwer USB Controller an all Apparater ze berichten, déi mat hinnen verbonne sinn.

[email  ~ $ lsusb

Bus 001 Device 002: ID 8087:8000 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 0bda:b728 Realtek Semiconductor Corp. 
Bus 002 Device 004: ID 5986:0249 Acer, Inc 
Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. 
RTS5129 Card Reader Controller
Bus 002 Device 002: ID 045e:00cb Microsoft Corp. 
Basic Optical Mouse v2.0
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 
2.0 root hub

Dir kënnt d'Optioun -v benotze fir detailléiert Informatioun iwwer all USB-Gerät ze generéieren.

[email  ~ $ lsusb -v

6. Wéi Drécken PCI Apparater Informatiounen

PCI Geräter kënnen USB Ports, Grafikkaarten, Netzwierkadapteren, etc. Den lspci Tool gëtt benotzt fir Informatioun iwwer all PCI Controller op Ärem System plus d'Apparater ze generéieren déi mat hinnen verbonne sinn.

Fir Informatiounen iwwer PCI-Geräter ze drécken, lafen de folgende Kommando.

[email  ~ $ lspci

00:00.0 Host bridge: Intel Corporation Haswell-ULT 
DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT 
Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller
(rev 0b)
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC 
(rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 
(rev 04)
00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller 
(rev 04)
00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 3 
(rev e4)
00:1c.3 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 4 
(rev e4)
00:1c.4 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 5 
(rev e4)
00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 
(rev 04)
00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller 
(rev 04)
00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 
[AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 
PCI Express Gigabit Ethernet Controller (rev 10)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. 
RTL8723BE PCIe Wireless Network Adapter
03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

Benotzt d'Optioun -t fir Output an engem Bamformat ze produzéieren.

[email  ~ $ lspci -t

-[0000:00]-+-00.0
           +-02.0
           +-03.0
           +-14.0
           +-16.0
           +-1b.0
           +-1c.0-[01]----00.0
           +-1c.3-[02]----00.0
           +-1c.4-[03]----00.0
           +-1d.0
           +-1f.0
           +-1f.2
           \-1f.3

Benotzt d'Optioun -v fir detailléiert Informatioun iwwer all verbonne Gerät ze produzéieren.

[email  ~ $ lspci -v

00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
	Subsystem: Lenovo Device 3978
	Flags: bus master, fast devsel, latency 0
	Capabilities: 

00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT 
Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device 380d
	Flags: bus master, fast devsel, latency 0, IRQ 62
	Memory at c3000000 (64-bit, non-prefetchable) [size=4M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 6000 [size=64]
	Expansion ROM at  [disabled]
	Capabilities: 
	Kernel driver in use: i915
.....

7. Wéi Drécken SCSI Apparater Informatiounen

Fir all Är scsi/sata Apparater ze gesinn, benotzt de lsscsi Kommando wéi follegt. Wann Dir de lsscsi Tool net installéiert hutt, fuert de folgende Kommando fir et z'installéieren.

$ sudo apt-get install lsscsi        [on Debian derivatives]
# yum install lsscsi                 [On RedHat based systems]
# dnf install lsscsi                 [On Fedora 21+ Onwards]

No der Installatioun, lafen de lsscsi Kommando wéi gewisen:

[email  ~ $ lsscsi

[0:0:0:0]    disk    ATA      ST1000LM024 HN-M 2BA3  /dev/sda 
[1:0:0:0]    cd/dvd  PLDS     DVD-RW DA8A5SH   RL61  /dev/sr0 
[4:0:0:0]    disk    Generic- xD/SD/M.S.       1.00  /dev/sdb 

Benotzt d'Optioun -s fir Apparatgréissten ze weisen.

[email  ~ $ lsscsi -s

[0:0:0:0]    disk    ATA      ST1000LM024 HN-M 2BA3  /dev/sda   1.00TB
[1:0:0:0]    cd/dvd  PLDS     DVD-RW DA8A5SH   RL61  /dev/sr0        -
[4:0:0:0]    disk    Generic- xD/SD/M.S.       1.00  /dev/sdb        -

8. Wéi Drécken Informatiounen iwwert SATA Apparater

Dir kënnt e puer Informatioun iwwer sata Geräter op Ärem System fannen wéi follegt mam hdparm Utility. Am Beispill hei ënnen hunn ech de Blockapparat /dev/sda1 benotzt deen d'Harddisk op mengem System ass.

[email  ~ $ sudo hdparm /dev/sda1

/dev/sda1:
 multcount     =  0 (off)
 IO_support    =  1 (32-bit)
 readonly      =  0 (off)
 readahead     = 256 (on)
 geometry      = 56065/255/63, sectors = 2048000, start = 2048

Fir d'Informatioun iwwer d'Geometrie vum Apparat a punkto Zylinder, Kappen, Secteuren, Gréisst, an de Startoffset vum Apparat ze drécken, benotzt d'Optioun -g.

[email  ~ $ sudo hdparm -g /dev/sda1

/dev/sda1:
 geometry      = 56065/255/63, sectors = 2048000, start = 2048

9. Wéi kontrolléieren Linux Dateisystem Informatiounen

Fir Informatiounen iwwer Dateisystempartitionen ze sammelen, kënnt Dir d'Dateisystempartitionen änneren, et kann och benotzt ginn fir Informatioun iwwer déi verschidde Partitionen op Ärem Dateiesystem ze gesinn.

Dir kënnt Partitionsinformatioun wéi follegt drécken. Denkt drun de Kommando als Superuser auszeféieren oder soss kënnt Dir keng Ausgang gesinn.

[email  ~ $ sudo fdisk -l

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! 
The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, 
total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xcee8ad92

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.

10. Wéi kontrolléieren Linux Hardware Komponente Infoen

Dir kënnt och d'dmidecode Utility benotze fir Hardwareinformatioun ze extrahieren andeems Dir Daten aus den DMI Dëscher liest.

Fir Informatiounen iwwer d'Erënnerung ze drécken, lafen dëse Kommando als Superuser.

[email  ~ $ sudo dmidecode -t memory

# dmidecode 2.12
# SMBIOS entry point at 0xaaebef98
SMBIOS 2.7 present.

Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
	Error Detecting Method: None
	Error Correcting Capabilities:
		None
	Supported Interleave: One-way Interleave
	Current Interleave: One-way Interleave
	Maximum Memory Module Size: 8192 MB
	Maximum Total Memory Size: 32768 MB
	Supported Speeds:
		Other
	Supported Memory Types:
		Other
	Memory Module Voltage: Unknown
	Associated Memory Slots: 4
		0x0006
		0x0007
		0x0008
		0x0009
	Enabled Error Correcting Capabilities:
		None
...

Fir Informatiounen iwwer de System ze drécken, lafen dëse Kommando.

[email  ~ $ sudo dmidecode -t system

# dmidecode 2.12
# SMBIOS entry point at 0xaaebef98
SMBIOS 2.7 present.

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: LENOVO
	Product Name: 20354
	Version: Lenovo Z50-70
	Serial Number: 1037407803441
	UUID: 29D2B1E4-37D2-11E4-9F6E-28D244EBBD98
	Wake-up Type: Power Switch
	SKU Number: LENOVO_MT_20354_BU_idea_FM_Lenovo Z50-70
	Family: IDEAPAD
...

Fir Informatiounen iwwer BIOS ze drécken, lafen dëse Kommando.

[email  ~ $ sudo dmidecode -t bios

# dmidecode 2.12
# SMBIOS entry point at 0xaaebef98
SMBIOS 2.7 present.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: LENOVO
	Version: 9BCN26WW
	Release Date: 07/31/2014
	Address: 0xE0000
	Runtime Size: 128 kB
	ROM Size: 4096 kB
	Characteristics:
		PCI is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
		Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
		5.25"/360 kB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		8042 keyboard services are supported (int 9h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
		UEFI is supported
	BIOS Revision: 0.26
	Firmware Revision: 0.26
...

Fir Informatiounen iwwer de Prozessor ze drécken, lafen dëse Kommando.

[email  ~ $ sudo dmidecode -t processor

# dmidecode 2.12
# SMBIOS entry point at 0xaaebef98
SMBIOS 2.7 present.

Handle 0x0004, DMI type 4, 42 bytes
Processor Information
	Socket Designation: U3E1
	Type: Central Processor
	Family: Core i5
	Manufacturer: Intel(R) Corporation
	ID: 51 06 04 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 69, Stepping 1
	Flags:
...

Resumé

Et gi vill aner Weeër déi Dir benotze kënnt fir Informatiounen iwwer Äre System Hardware Komponenten ze kréien. Déi meescht vun dëse Kommandoen benotzen Dateien am/proc Verzeichnis fir Systeminformatioun ze extrahieren.

Hoffen Dir fannt dës Tipps an Tricks nëtzlech an erënnert Iech un e Kommentar ze posten am Fall wou Dir méi Informatioun dozou wëllt addéieren oder wann Dir Schwieregkeeten hutt fir ee vun de Kommandoen ze benotzen. Vergiesst net ëmmer verbonne mat Tecmint ze bleiwen.